Fireball Angel Tears 35ml

It's about time we stepped into the hobbyist coating market, and with the introduction of Fireball Angel Tears - now is the time!

Angel Tears is an innovative coating that protects the paint surface from external contaminants, produces a deep shine and has intense hydrophobic properties. Angel Tears is easy to apply with a long working time and a lot of forgiveness (which cannot be said about all hobbyist coatings). Angel Tears is a true ceramic coating that hardens on the paint and creates a chemical bond. While we suggest Angel Tears for the paintwork, it can also be used on plastic trims and glass with care as well.

• 12-24 Months Longevity
• Safe For Paint, Trims, Glass, Wheels
• High-Quality SiO2 Ingredients
• Repels Water, Dirt & Dust
• High Shine Finish
• Hard Coating; Chemically Bonds

A 35ml Angel Tears is plenty to do all sized vehicles including SUVs. You should have some left over to do trims or other surfaces with the correct usage. A little goes a long way!

Looking to hit the ground running? Check out the Angel Tears Kit here.

Kit Includes: 35ml Bottle & Applicator

Sam Says: "Finally a hobbyist coating that is made for true performance. Fireball Korea have been making professional grade ceramic coatings for a very long time; and Angel Tears utilises the same proprietary chemicals to ensure an excellent bond. Angel Tears is excellent for new or second hand vehicles and easy to use - so you can sure of the best results. I always recommend trying a small section first (maybe your wing mirror) so you can be 100% confident before you launch into the entire vehicle."

Instructions
1. You're going to be locking in your paint and other surfaces - so the first important step is to prepare your paintwork to a high level. We suggest a clay bar and cut/polish before you begin to remove surface scratches and contamination.
2. Wash and dry your vehicle thoroughly. Dry water from all cracks and crevices, door jambs, badges etc... during application water will inhibit the bond of the coating so it's important your vehicle is as dry as possible.
3. If you have them put on nitrile gloves. Use the Fireball Reborn and 2x Microfibre Towels and strip all the surfaces; using a light mist of product - one cloth to spread and another to wipe off. Repeat if necessary until you have stripped the entire vehicle.
4. Starting a few panels at a time wipe Angel Tears on using the applicator in a cross hatch pattern - left to right, then up and down. We suggest one or two panels at a time.
5. Allow the product to cure slightly and buff off after 5-10 mins maximum. Wipe off time depends a bit on the heat and humidity - so we suggest wait 5 minutes and wipe off a test section to ensure it wipes off nicely.
6. After applying to the entire car do a thorough check for high spots (excess coating) and then allow the product to cure for 24-48 hours until the vehicle sees any rain or water. Don't wash for 7 days.